Do Concrete Cubes Measure Maturity?
Cube results tell you the maturity of the concrete.
Incorrect. Cubes give a measured strength. Maturity comes from the temperature record; the two are paired during calibration, not derived from each other.The correct sequence
| Activity | What it provides | Reference |
|---|---|---|
| Temperature sensor | Temperature history from which the maturity index is calculated. | ASTM C1074 |
| Cube or cylinder compression test | Measured compressive strength at the test point. | BS EN 12390-3 (specimens made and cured to BS EN 12390-2) |
| Calibration analysis | Relationship between maturity index and measured strength. | ASTM C1074 |
| Field monitoring | Maturity index from the structure's temperature history. | ASTM C1074 |
| Strength estimate | Estimated in-situ strength derived from the calibrated relationship. | ASTM C1074 |
The cube is therefore a strength measurement, not a maturity measurement. This distinction matters because a cube test can be used to construct the strength–maturity relationship without the cube itself measuring maturity.
Cubes keep a role after calibration
Establishing the relationship is not the end of the cube's usefulness. ASTM C1074 lists as a limitation that the method needs to be supplemented by other indications of the potential strength of the field concrete, and cubes are how that is normally done — not through a special test before each pour, but through the conformity and identity testing already running on the job, read against the maturity estimates rather than filed apart from them. Cubes are also how the relationship is checked over time, and how it is re-established when materials, proportions or production practice change.
Related pages
References
- Standard ASTM C1074-19e1 — Standard Practice for Estimating Concrete Strength by the Maturity Method.
- Standard BS EN 12390-3 — Testing hardened concrete. Compressive strength of test specimens.
- Standard BS EN 12390-2 — Testing hardened concrete. Making and curing specimens for strength tests.
- Report ACI 228.1R-19 — Report on Methods for Estimating In-Place Concrete Strength.
- Paper Carino, N. J. and Lew, H. S. (2001) — The Maturity Method: From Theory to Application. Proceedings of the 2001 Structures Congress & Exposition, ASCE.
Standards are cited by identifier and title. Consult the current licensed standard text before making project decisions. Publisher links were verified on 11 August 2026 and should be rechecked before publication.
Content and sources last reviewed 11 August 2026.