Rebound Hammer Testing
Does a Schmidt hammer measure concrete maturity?
A rebound (Schmidt) hammer is a way of measuring concrete maturity.
Incorrect. The two methods measure different quantities under different standards and are not interchangeable.They are different in principle
| Method | Primary measured quantity | How strength is estimated | Governing document |
|---|---|---|---|
| Rebound hammer | Rebound number / surface response | Through a relationship to compressive strength established for the concrete and test conditions. | BS EN 12504-2 for the test procedure; BS EN 13791 for its use in assessing in-situ strength |
| Maturity method | Concrete temperature over time | Through a maturity function and a strength–maturity relationship. | ASTM C1074 |
ACI 228.1R-19 treats rebound number and maturity as separate in-place methods for estimating concrete strength, reviewing the principle, inherent limitations and repeatability of each.
The UK and European position
In UK and European practice the two sit in different places entirely. BS EN 12504-2 specifies the procedure for determining rebound number. BS EN 13791 then governs how indirect methods such as rebound number and ultrasonic pulse velocity are used to estimate in-situ compressive strength, and requires that relationship to be established rather than assumed — typically against cores taken under BS EN 12504-1.
The maturity method is not one of the indirect methods BS EN 13791 covers. It is a separate technique for estimating strength development from thermal history, standardised in ASTM C1074 and referenced in execution practice for striking decisions.
A shared caution
Both methods are indirect. Neither produces a measured compressive strength; both produce an estimate that depends on a relationship established beforehand for the concrete concerned. Both are affected by conditions the reading itself does not reveal — surface preparation, moisture and carbonation for rebound testing; batching accuracy, moisture availability and placement quality for maturity.
Related pages
References
- Standard BS EN 12504-2 — Testing concrete in structures. Non-destructive testing. Determination of rebound number.
- Standard BS EN 13791:2019 — Assessment of in-situ compressive strength in structures and precast concrete components.
- Standard ASTM C1074-19e1 — Standard Practice for Estimating Concrete Strength by the Maturity Method.
- Report ACI 228.1R-19 — Report on Methods for Estimating In-Place Concrete Strength.
- Paper Carino, N. J. and Lew, H. S. (2001) — The Maturity Method: From Theory to Application. Proceedings of the 2001 Structures Congress & Exposition, ASCE.
Standards are cited by identifier and title. Consult the current licensed standard text before making project decisions. Publisher links were verified on 11 August 2026 and should be rechecked before publication.
Content and sources last reviewed 11 August 2026.